Prior to load performance testing, scaffold planks were examined for configuration requirements in accordance with the below referenced clauses of AS/NZS 1577. Dimensional and configurational details of the Scaffold Steel Plank were recorded as follows:
The length of the planks was 2.4m (nom.) and the width 230mm (nom.):
The planks’ base metal thickness was measured to be 1.8mm.
The planks were stamped with the identification markings ‘KwikUP AS/NZS 1577:2013 WLL 250kg UDL’:
End caps were welded to both ends of the scaffold planks. The end caps were fitted flush to the ends of the planks:
The surface of the Scaffolding Metal Planks was perforated with 8.0mm (nom.) circular openings. The preformation openings had a nominal area of 50.3mm
All surfaces of the planks were free from burrs and sharp edges:
The planks were fabricated from galvanised steel sheet to prevent corrosion:
Lateral bracing metal straps were welded between the bottom flanges at 0.8m and 1.6m on the 2.4m long planks.
